Menu

Low Profile Plate Carrier LPC, Warrior

The Low Profile Carrier V1 comes with Solid Side Cummerbunds. The Patent Pending Warrior LPC Low Profile Plate Carrier represents a new generation of armour carriers. Designed with direct input from serving operators within the SF community, the LPC incorporates many new features that combine to make it one of the best carriers on the market today. Description
Products marked are in stock ?
Color
In stock
In stock
In stock
In stock
Variant
In stock
In stock
Size
In stock
In stock
253,21 €

Description

The Low Profile Carrier V1, warrior

The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling. The Thermo Pad also helps to decrease the back plate signature associated with ballistic trauma.

The LPC utilises state of theart materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.

The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.

TWO VERSIONS

VERSION 1 - "full" sides for inserting soft ballistics and even side plates

VERSION 2 - relieved sides with a binding for gripping other accessory

Features:
  • 500D Crye MultiCam Nylon
  • Thermo Pads for Cooling & Comfort
  • compatible with the RPC panel's
  • Interchangeable Front Panels
  • Recommended Stand Alone Armour
  • Holds Hard & Soft Armour
  • Quick release Speed Clips
  • Large Upper Admin Pocket
  • Removable shoulder Pads
  • Hyperlon shoulders
  • Holds side plates
  • Low profile
  • Lightweight

Hard Armour
  • Stand alone plates, 250mm x 300mm (10" x 12")and SAPI 238mm x 314mm (9.5" x 12.5")
  • ICW plates 250mm x 300mm and SAPI 238mm x 314mm, with Nexus NIJ 3a soft armour

All Warrior lightweight plate carriers are designed to work with Nexus style SAPI shaped 10" x 12" ( 250mm + x 300mm + ) ballistic plates including bevelled edge ceramic plates and smooth edge composite plates. Steel plates with hard edges and corners should be wrapped to protect the internals of the carriers to avoid excessive wear. Warrior Assault Systems will not be held responsible for any damage to a plate carrier from misuse as stated above.

Soft Armour

NIJ Level 3a soft armour

High Quality Threads

Thread quality is fundamental to the construction, durability and strength of tactical equipment.

Two factors have a negative impact on the life Span of threads

  1. Mildew is one of the most common factors in the deterioration of military kit, causing it to rot and ultimately results in unacceptable failure.
  2. Sunlight has a harmful effect on the performance of threads, and over time causes their deterioration.

Warrior only uses the highest quality US Mil Spec nylon threads imported from the USA which are threated against both UV and Mildew.

  • Fiber Resistance to Acid - Good
  • Fiber Resistance to Alkali - Good
  • Fiber Abrasion Resistance - Excellent
  • Fiber Resistance to Heat - 142 deg C (Highest continuous temperature before breakdown)
  • Fiber Melting Point - 265 deg C
MIL SPEC Fabric

500D Nylon fabric feature enhanced tear and abrasion resistance, and long lasting durability, 500D Nylon fabric made with solution dyed yarns are inherently stain resistant and easy to clean. MultiCam, Coyote Tan, Ranger Green, Black and A-TACS FG fabrics are all I.R Treated for the lowest signature.

Plastic Hardware

Warrior only uses the highest quality Military rated Clips and accessories.

MOLLE System

This product uses MOLLE to connect to other items creating a modular and adaptive system.

* Products may differ from the picture shown due to product improvements over time

MOLLE Webbing

This product contains MOLLE webbing that will allow you to attach other pouches using the MOLLE system.

  • Genuine US Mil Spec Webbing
  • 25 mm (1") Breaking Strain: 1200 lbs
  • 38 mm (1.5 ") Breaking Strain: 1800 lbs
  • 50 mm (2") Breaking Strain: 2200 lbs

Parameters

Brand Warrior Assault Systems
Rating 4.9
  • 100 %of customers recommended
  • 4customer reviews

Do you have experiences with this item?
Write a review and help others to choose.

Write review
Radomír
Radomír
I recommend her. It looks very good on the body. With the Kevlar insert, it is worn without a problem. Colleagues wore it with the ceramic one. It's really one of the best for this money.
  • Low weight High compatibility Really lasts Wear with Kevlar plate (front and back) completely fine I wore it for a year in the service and I can only praise it It didn't get in the way at all I wore it with a thigh holster, but some also with a waist holster and it's fine Taking it off quickly thanks the buckles are GREAT! Just pull and it's down. A lot of additional pockets have been added to the MOLLE system (for radio, MP5 magazine, etc.)
  • My colleagues didn't complain about driving, but I preferred to take it off. I would have preferred to have even more freedom. If you wear it for, say, 6 hours in a row and you're still wearing black shoes, the ventilation system won't help you much :-)
Review from customer from Czech republic Show original

Rated option: Low Profile Carrier LPC V1, Warrior, black, M

JozefR
JozefR
High-quality, comfortable salary carrier. Templates gear is possibly better, but also significantly more expensive. Use for real ballistic salaries, not quasi for airsoft.
  • Good carrier, comfortable, adjustable and low-profile (no panels)
  • Hard to find zip backpanel to connect camelbag, could have been included in the price. Untraceable data on how the ballistic plate goes in (it is SAPI M for M size, be careful not non-standard custom 250x300 mm)
Review from customer from Czech republic Show original

Rated option: Low Profile Plate Carrier Warrior LPC V2, Multicam, M

Kaucký M.
Kaucký M.
Quality
Review from customer from Czech republic Show original

Rated option: Low Profile Plate Carrier Warrior LPC V1, Multicam, L

Jakub M.
Jakub M.
Great carrier just top
Review from customer from Czech republic Show original

Rated option: Low Profile Plate Carrier Warrior LPC V1, Multicam, M

Do you have any questions related to this product?
Write it here and we will gladly reply.

Ask question

Check out other products from Warrior Assault Systems brand, or look in category

Alternatives

Plate Carrier Sentry Lightweight, Condor

Plate Carrier Sentry Lightweight, Condor

The Condor Sentry Plate Carrier is the update of our classic Compact Plate Carrier.
5x
2 variants in stock from 69,75 €
Modular Operator Plate Carrier MOPC, Green, Condor

Modular Operator Plate Carrier MOPC, Green, Condor

The Condor Modular Operator Plate Carrier was designed for modular attachments on all sides as well as for functionality and operator mobility. The MOPC…
In stock 1 pc 101,66 €
Plate Carrier DCS Elite Ops, Warrior

Plate Carrier DCS Elite Ops, Warrior

The DCS (Dynamic Combat System) is a lightweight low profile system which is rugged yet ergonomically designed to provide exceptional comfort and…
6x
25 variants in stock from 249,22 €
Base Plate Carrier DCS Elite Ops, Warrior

Base Plate Carrier DCS Elite Ops, Warrior

The DCS (Dynamic Combat System) is a lightweight low profile system which is rugged yet ergonomically designed to provide exceptional comfort and…
15x
10 variants in stock from 187,04 €