Diamond BenschStone 6 x 2 ", Lansky

Diamond Bench Stone (6" x 2") Lansky

Lansky’s Diamond Bench Stones are designed for expert knife sharpening and woodworking tool care. All Lansky Diamond Bench Stones feature a full edge-to-edge diamond grit surface for quicker, more efficient sharpening. The abrasive surface measures 6" x 2" (15 x 5 cm). 

Lansky’s Diamond Bench Stones feature a high-impact plastic self-storing case that raises the stone as shown to the left for maximum safety and comfort. The bases come with non-slip rubber frame. 

Grit Guide

1. Extra Coarse (70 Grit)
2. Coarse (120 Grit)
3. Medium (280 Grit)
4. Fine (600 Grit)
5. Extra Fine (1,000 Grit)

Instructions

1. Select the proper stone for your edge.
   1. Extra Coarse - Coarse - For a completely dull or damaged edge
   2. Medium- To maintain an already sharp edge
   3. Fine- Extra Fine- to hone/polish a finished edge
2. Set the stone on a stable, flat surface.
3. Observe the bevel angle on the blade you intend to sharpen.  Then, bring the edge to the stone matching your sharpening angle to the bevel angle.
4. Using light pressure, push the edge of the blade across the stone in one motion, much like trying to slice a thin layer off the top of the stone. Maintaining a consistent angle is essential for the best results.
5. Repeat process 3-4 times on one side of the blade, then switch to the other side and repeat.
6. Repeat this process until edge is sharp.
7. Make sure to clean your stones with a damp rag after each use.  Store in a cool dry place.

Note: Do not use lubrication of any kind on the Diamond Stone Surface.