Riggers Belt - Elite Ops, Warrior
If a green circle is displayed on a variant, it means that in some combination of other variants, the selected variant is in stock. For example, a green circle on the "Color: black" variant means that a product in black is in stock at a size. Gradual selection of variants clarifies information on stock availability. You can start by selecting any variant.
Description
Riggers belt by war rior assault systems
The webbing used is 4088 type V11 and has a breaking strain greater than 6000 lbs. The Metal Buckles are made from heat treated hardware with a tensile strength of 2500 lbs and finished in Dark Grey Phosphate.
The Material is treated with a resin which makes the belt stiff yet pliable this is the perfect combination it will not dig in to your sides but is rigid enough to support a holster or drop leg without the belt twisting.
SIZES
- Small: 29″ to 32″
- Medium: 32″ to 35″
- Large: 35″ to 38″
- XLarge: 38″ to 41″
- Webbing: US Mil Spec 4088 type 13 Resin treated. Size 1 inch 23/32 ” Breaking Strain 7000 lbs
- V Ring Triangle: 1208-2 PS22020-2 Meets Spec PIA-H-7195 and PIA-H-7195- Load 2500 lbs Forged Steel with phosphate finish.
- Quick Fit Belt Buckle: 1203-2 PS22040-2 Meets Spec PIA-H-7195 ANSI Z-359.2 and CSA Z-259.12-01-Load 4000 Lbs Forged Steel with phosphate finish.
- Sewn with Multiply Nylon Bonded Mils Spec Thread
High Quality Threads
Thread quality is fundamental to the construction, durability and strength of tactical equipment.
Two factors have a negative impact on the life Span of threads
- Mildew is one of the most common factors in the deterioration of military kit, causing it to rot and ultimately results in unacceptable failure.
- Sunlight has a harmful effect on the performance of threads, and over time causes their deterioration.
Warrior only uses the highest quality US Mil Spec nylon threads imported from the USA which are threated against both UV and Mildew.
- Fiber Resistance to Acid - Good
- Fiber Resistance to Alkali - Good
- Fiber Abrasion Resistance - Excellent
- Fiber Resistance to Heat - 142 deg C (Highest continuous temperature before breakdown)
- Fiber Melting Point - 265 deg C
Parameters
| Brand | Warrior Assault Systems |
|---|
Do you have experiences with this item?
Write a review and help others to choose.
Do you have any questions related to this product?
Write it here and we will gladly reply.
Check out other products from Warrior Assault Systems brand, or look in category
Alternatives
US back BDU belt, black, Mil-Tec
Urban Tactical Belt®, Helikon
Trouser belt with thread buckle US BDU, olive, Mil-Tec
Duty Belt Elite Ops, Warrior
