Multi-Angle Knife Clamp, Lansky

Multi-Angle Knife Clamp Lansky

Original Design knife-handling clamp. This extruded aluminum knife handling clamp can hold almost any blade. The notched jaws provide secure and exact blade handling on almost all blades, including most narrow blades (such as tiny swiss army-type blades) 1/2" wide and under.

When sharpening highly polished or coated blades, we recommend the Dual Thumbscrew Soft-Grip Clamp. 

Key features

• extruded aluminum knife clamp
• provides secure and exact blade positioning
• provides secure blade handling on almost all blades including most narrow blades (such as tiny swiss army-type blades) 1/2" wide and under
• intended for use with the Lansky Sharpening System
• easy attaching knife blade to clamp
• easy mounting

Instructions

1. Loosen the front screw.
2. Tighten the back red thumb screw until it is approximately one full turn from being fully tightened.
3. Loosen the front screw of the knife clamp again to accommodate thickness of blade.
4. Attach the clamp to the spine of the knife blade at the center of the blade. Approximately 1/2 inch of the blade should extend from the end of the clamp.
5. Tighten the front screw again to hold the knife securely. Lock the blade in place by hand tightening the back red thumb screw on the clamp.