Silicone Water Guard Extreme Waterproofing, 350 ml, Atsko

Impregnation Silicone Water Guard Extreme, 350 ml, Atsko

Highly effective product for ensuring water repellency of textiles and leathers based on silicone polymers.  Thanks to its patented formula, the product is unique as it does not impair the breathability of membrane textiles (Gore-TEX®, Sympatex®, ...). In comparison to ATSKO SILICONE WATER GUARD, it is complemented by an effective UV filter. It is therefore suitable for all tarpaulins, canvases and other textiles that require water repellency as well as protection against mould, fungi, algae and also colour fading due to UV exposure. Used on marquees, boat covers, sunshades, outdoor wood, masonry, and furniture.

properities of Impregnation Silicone Water Guard Extreme

• A single spray is all it takes to guarantee a perfect effect. Repeated spraying is not recommended.
• It is tested for all natural and synthetic fibre textiles: nylon, polyester, blends, wool, etc. It is also suitable for suede and sanded leather (nubuck). It does not damage the breathability of sandwich structures with Gore-tex® and other membranes.
• Improves breathability of clothing and footwear.
• The water-repellent film formed is completely odourless when dry..
• The treated surface is resistant to the formation of salt stains and maps.
• It restores and replaces the factory silicone hydro-phobization of leather boots.
• 10g CO2 is used as the driving gas of the spray (the product leaves no carbon footprint).
• Packaging: eco-friendly 350 ml atomizer (CO2 driving gas)
• Shelf life: unlimited

INSTRUCTIONS FOR USE

Shake well before use.  First do a spot test for discoloration. The surface to be treated must be clean and dry. When applying, hold the container vertically, nozzle up, 15-20 cm from the material to be treated and spray slowly until the surface of the material is uniformly wet. A single spray is optimal. Use the treated product only after the product has completely dried and matured (polymerised).

• Warning: Low temperature, high humidity or reduced air circulation may extend the drying and curing time to 48 hours.
• !!!DANGER: Contains hydrocarbons, C9-C11, n-alkanes, iso-alkanes, cyclic, <2% aromatic, titanium-tetrabutanolate.

Extremely flammable aerosol. Bottle is pressurised, may rupture on heating. Causes severe eye irritation. May cause drowsiness or dizziness.If medical attention is required, keep product container or label handy. Keep out of reach of children. Protect from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. Do not spray into open flames or other sources of ignition. Do not pierce or burn after use. Avoid inhalation of aerosols. Use only outdoors or in well-ventilated areas. Wear safety glasses/face shield.

 IN CASE OF EYE INJURY

Gently flush with water for several minutes. Remove contact lenses if fitted and if they can be removed easily. Continue rinsing. Call a doctor immediately. Store in a well-ventilated place. Store locked. Protect from sunlight. Do not expose to temperatures above 50°C. Dispose of contents/packaging by taking to a hazardous waste collection facility.